Micron CSC Antifouling Paint

Micron CSC provides multi-season antifouling protection against all types of marine fouling organisms.

When the time comes to apply new antifouling paint to your boat’s hull, the job will be a lot easier if you use Micron CSC. This is because compared to hard antifouling paints, Micron CSC’s ablative formula wears away or “self-polishes” in a controlled fashion as the boat is used. Controlled polishing reduces the build-up of old coatings—which minimizes the need for laborious sanding at haulout.

And compared to hard antifouling paints, Micron CSC is also better for the environment. This is because it uses less copper more efficiently than traditional, hard antifouling paints.

Boats painted with Micron CSC can also be hauled, stored and relaunched without a loss of antifouling effectiveness—which means you can paint in the fall and splash in the spring!

Interlux Ultimate No Sand System

Key Features

• Fast-drying formula
• Antifouling performance for all fouling waters 
• Suitable for powerboats and sailboats
• Multi-season protection
• Self-polishing formula reduces paint build-up
• Reduces need for sanding prior to repainting

Physical Data

• Vehicle type: Copolymer ablative 
• Finish: Matte
• Components: 1
• Curing mechanism: Solvent release
• Solids by Volume: (Theoretical): 58%
• Coverage: 440sq.ft./gal.
• VOC: 370 grams/liter (as supplied) 
• Active ingredients: 37.2% Cuprous oxide

Application

• Application Method: Brush, roller, airless, or conventional spray
• Number of coats recommended: 2-3 Minimum per season with additional coats for extended service. Bare wood: 3 coats (first thinned) 
• Wet Film Thickness: 3.4 mils/coat
• Dry Film Thickness: 2 mils/coat
• Applicator: High-quality short nap roller (maximum 3/16” nap)
• Application temperature: Min. /Max. Range: 10°C/50°F and maximum 35°C/95°F.
• Thinner: 216, Model 117598 or 433, Model 203679