Jabsco 18590 Sealed Macerator Pump with Run-Dry Protection

Jabsco 18590 Sealed Macerator Pump with Run-Dry Protection

$232.99 Sale

  • The Jabsco 18590 Series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area
  • Self priming to 5 feet this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes
  • Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
  • It is recommended that holding tanks be flushed with several gallons of water after each pump out
  • This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage
  • The Jabsco Macerator Pump is the ideal pump for the emptying of fish box and livewell receptacles
  • Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank
  • If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties
  • Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline
  • Again the Jabsco Macerator pump has the characteristics that lend themselves to this application
  • The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed by the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats

Specifications:

  • Flow Rate: 12 GPM
  • Port Size: 1-1/2" inlet ( NPT and Hose Barb options) with 1" Hose Barb Outlet
  • Stainless steel 4-blade cutter reduces particle size to 1/8" max
  • New Nitrile compound flexible impeller
  • Lip-type seal
  • Self-priming pump with stainless steel wear plate
  • Fully enclosed, permanent magnet-type motor
  • Can run dry without damage
  • Meets ISO 8846 MARINE ignition protection standards
  • Dimensions: 11-9/16" L x 3-1/4" H x 4-11/16" W
  • Nominal Voltage: 12V DC
    • Max. Current Draw: 16A
    • Recommended Fuse: 20A
  • Nominal Voltage: 24V DC
    • Max. Current Draw: 8A
    • Recommended Fuse: 15A