Running rigging by boat
Use the line sizes and lengths below as a starting point, then open a line preloaded in our custom running-rigging builder.
Fountaine Pajot Athena 38 - verify the spar package and existing lines before ordering
Onboard shop schedule
Spar manufacturerNot recorded
Measure your existing lines when possible and confirm the mast and boom identification before ordering.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Mainsail halyard | 1 | 49 m Builder preset: 161 ft, rounded up | 1/2 in (12 mm) | Factory construction not stated | Build recommended replacement |
| Jib halyard | 1 | 33 m Builder preset: 109 ft, rounded up | 1/2 in (12 mm) | Factory construction not stated | Build recommended replacement |
| Spinnaker halyard | 1 | 33 m Builder preset: 109 ft, rounded up | 1/2 in (12 mm) | Factory construction not stated | Build recommended replacement |
| Topping lift | 1 | 33 m Builder preset: 109 ft, rounded up | 3/8 in (10 mm) | Factory construction not stated | Build recommended replacement |
| Flag halyard | 1 | 14 m Builder preset: 46 ft, rounded up | 5/32 in (4 mm) | Factory construction not stated4 mm line is not available in the online builder; request a quote. | Request a quote |
| Reef 1 | 1 | 17 m Builder preset: 56 ft, rounded up | 1/2 in (12 mm) | Factory construction not stated | Build recommended replacement |
| Reef 2 | 1 | 23 m Builder preset: 76 ft, rounded up | 1/2 in (12 mm) | Factory construction not stated | Build recommended replacement |
| Reef 3 | 1 | 29 m Builder preset: 96 ft, rounded up | 1/2 in (12 mm) | Factory construction not stated | Build recommended replacement |