Running rigging by boat
Use the published factory sizes and lengths below as a starting point, then open a line preloaded in our custom running-rigging builder.
Lagoon 450 Sportop - confirm the production year, mast package, and existing deck routing before ordering
Factory owner’s-manual schedule
Spar manufacturerNot stated in source manual
The Lagoon manual publishes factory rope codes, quantities, metric diameters, lengths, colors, and selected end fittings, but does not identify the spar manufacturer in this table.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Mainsail halyardBlackFactory code 064432 | 1 | 67 m Builder preset: 220 ft, rounded up | 1/2 in (12 mm) | Factory construction not statedFactory schedule specifies a splice. | Build recommended replacement |
| Lowering lineGreyFactory code 067186 | 1 | 25 m Builder preset: 83 ft, rounded up | 1/4 in (6 mm) | Factory construction not stated | Request a quote |
| Pig tailGreyFactory code 129099 | 1 | 0.65 m Builder preset: 3 ft, rounded up | 5/32 in (4 mm) | Factory construction not stated | Request a quote |
| Pig tail - pulleyGreyFactory code 124485 | 2 | 0.65 m Builder preset: 3 ft, rounded up | 5/32 in (4 mm) | Factory construction not stated | Request a quote |
| UphaulGreyFactory code 069958 | 1 | 46 m Builder preset: 151 ft, rounded up | 1/2 in (12 mm) | Factory construction not stated | Request a quote |
| MainsheetBeigeFactory code 074199 | 1 | 35 m Builder preset: 115 ft, rounded up | 9/16 in (14 mm) | Factory construction not statedThis diameter is not yet available in the online builder. | Request a quote |
| Port mainsail hauling lineRedFactory code 124487 | 1 | 19 m Builder preset: 63 ft, rounded up | 3/8 in (10 mm) | Factory construction not statedFactory schedule specifies a splice. | Build recommended replacement |
| Starboard mainsail hauling lineGreenFactory code 124486 | 1 | 19 m Builder preset: 63 ft, rounded up | 3/8 in (10 mm) | Factory construction not statedFactory schedule specifies a splice. | Build recommended replacement |
| Reef 1 - automaticWhite with yellow braidFactory code 129621 | 1 | 32 m Builder preset: 105 ft, rounded up | 9/16 in (14 mm) | Factory construction not statedSupplied as part of Lagoon kit 191075. This diameter is not yet available in the online builder. | Request a quote |
| Reef 2 - automaticWhite with green braidFactory code 129622 | 1 | 40 m Builder preset: 132 ft, rounded up | 9/16 in (14 mm) | Factory construction not statedSupplied as part of Lagoon kit 191075. This diameter is not yet available in the online builder. | Request a quote |
| Reef 3 - automaticWhite with navy braidFactory code 191082 | 1 | 53 m Builder preset: 174 ft, rounded up | 9/16 in (14 mm) | Factory construction not statedSupplied as part of Lagoon kit 191075. This diameter is not yet available in the online builder. | Request a quote |
| Jib halyardNavy blueFactory code 064428 | 1 | 44 m Builder preset: 145 ft, rounded up | 1/2 in (12 mm) | Factory construction not statedFactory schedule specifies a splice. | Request a quote |
| Jib sheetsBlueFactory code 064472 | 2 | 19 m Builder preset: 63 ft, rounded up | 9/16 in (14 mm) | Factory construction not statedThis diameter is not yet available in the online builder. | Request a quote |
| Gennaker halyardBlack/red blendFactory code 153764 | 1 | 70 m Builder preset: 230 ft, rounded up | 3/8 in (10 mm) | Factory construction not statedFactory schedule specifies a splice and shackle 1205. | Request a quote |
| Gennaker sheet and armGreen and redFactory code 064813 | 1 | 29 m Builder preset: 96 ft, rounded up | 9/16 in (14 mm) | Factory construction not statedThis diameter is not yet available in the online builder. | Request a quote |
| Symmetric spinnaker halyardBlack/red blendFactory code 122121 | 1 | 48 m Builder preset: 158 ft, rounded up | 1/2 in (12 mm) | Factory construction not statedFactory schedule specifies a snap shackle. | Request a quote |
| Symmetric spinnaker sheet and armGreen and redFactory code 044239 | 2 | 18 m Builder preset: 60 ft, rounded up | 1/2 in (12 mm) | Factory construction not statedFactory schedule specifies a snap shackle and splice. | Request a quote |