Running rigging by boat
Use the published factory sizes and lengths below as a starting point, then open a line preloaded in our custom running-rigging builder.
Jeanneau Sun Odyssey 43 DS with the factory furling-mast arrangement
Factory furling-mast schedule
Spar manufacturerNot stated in source manual
The factory manual separates furling- and classic-mast lines. Confirm the installed mast and whether the boat carries a symmetric or asymmetric spinnaker before ordering optional lines.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Mainsheet traveler controlWhite / Red | 2 | 6 m Builder preset: 20 ft, rounded up | 5/16 in (8 mm) | BraidFactory manual calls this 'Horse adjustment.' Two lines are specified. Source: PDF pages 42 and 44. | Build recommended replacement |
| Boom vangWhite / Yellow | 1 | 11 m Builder preset: 37 ft, rounded up | 3/8 in (10 mm) | Halyard braidFactory table uses 'Braid H,' defined in the manual as halyard braid. Source: PDF page 42. | Build recommended replacement |
| Mainsail outhaulWhite / Red | 1 | 12 m Builder preset: 40 ft, rounded up | 3/8 in (10 mm) | BraidFactory manual calls this 'Main foot band.' Source: PDF page 42. | Build recommended replacement |
| Main halyardWhite / Yellow | 1 | 36 m Builder preset: 119 ft, rounded up | 1/2 in (12 mm) | Halyard braidFactory table uses 'Braid H,' defined in the manual as halyard braid. The SuperSpeed builder color differs from the factory color. Source: PDF page 44. | Build recommended replacement |
| MainsheetWhite / Red | 1 | 20 m Builder preset: 66 ft, rounded up | 1/2 in (12 mm) | BraidSource: PDF page 44. | Build recommended replacement |
| Main topping liftWhite / Yellow | 1 | 32 m Builder preset: 105 ft, rounded up | 5/16 in (8 mm) | BraidSource: PDF page 44. | Build recommended replacement |
| Genoa halyardWhite / Blue | 1 | 36 m Builder preset: 119 ft, rounded up | 1/2 in (12 mm) | Halyard braidFactory table uses 'Braid H,' defined in the manual as halyard braid. The SuperSpeed builder color differs from the factory color. Source: PDF page 46. | Build recommended replacement |
| Genoa furling lineWhite / Yellow | 1 | 23 m Builder preset: 76 ft, rounded up | 3/8 in (10 mm) | BraidSource: PDF page 46. | Build recommended replacement |
| Genoa sheetsWhite / Blue | 2 | 17 m Builder preset: 56 ft, rounded up | 9/16 in (14 mm) | BraidThe factory specifies two 17 m sheets. A 14 mm builder variant is not currently available. Source: PDF page 46. | Request a quote |
| Spinnaker halyard - symmetric optionWhite / Yellow | 1 | 40 m Builder preset: 132 ft, rounded up | 1/2 in (12 mm) | Halyard braidOptional symmetric-spinnaker equipment. The SuperSpeed builder color differs from the factory color. Source: PDF page 48. | Build recommended replacement |
| Spinnaker pole lift - symmetric optionWhite / Green / Black | 1 | 39 m Builder preset: 128 ft, rounded up | 3/8 in (10 mm) | BraidOptional symmetric-spinnaker equipment. No exact current builder color match. Source: PDF page 48. | Build recommended replacement |
| Spinnaker guys and sheets - symmetric optionWhite / Red | 2 | 24 m Builder preset: 79 ft, rounded up | 1/2 in (12 mm) | KevlarOptional symmetric-spinnaker equipment. Factory construction is Kevlar; verify the modern replacement before ordering. Source: PDF page 48. | Build recommended replacement |
| Spinnaker pole downhaul - symmetric optionWhite / Violet / Green | 1 | 18 m Builder preset: 60 ft, rounded up | 3/8 in (10 mm) | BraidOptional symmetric-spinnaker equipment. No exact current builder color match. Source: PDF page 48. | Build recommended replacement |
| Spinnaker pole-car adjustment - symmetric optionWhite / Yellow | 1 | 10 m Builder preset: 33 ft, rounded up | 5/16 in (8 mm) | BraidOptional symmetric-spinnaker equipment. Source: PDF page 48. | Build recommended replacement |
| Spinnaker halyard - asymmetric optionWhite / Yellow | 1 | 40 m Builder preset: 132 ft, rounded up | 1/2 in (12 mm) | Halyard braidOptional asymmetric-spinnaker equipment. The SuperSpeed builder color differs from the factory color. Source: PDF page 48. | Build recommended replacement |
| Spinnaker sheets - asymmetric optionWhite / Green | 2 | 24 m Builder preset: 79 ft, rounded up | 1/2 in (12 mm) | KevlarOptional asymmetric-spinnaker equipment. Factory construction is Kevlar; verify the modern replacement before ordering. Source: PDF page 48. | Build recommended replacement |
| Tack runner - asymmetric optionWhite / Red | 1 | 6 m Builder preset: 20 ft, rounded up | 3/8 in (10 mm) | Halyard braidOptional asymmetric-spinnaker equipment. Source: PDF page 48. | Build recommended replacement |
| Mainsail furling lineWhite / Yellow | 1 | 18 m Builder preset: 60 ft, rounded up | 3/8 in (10 mm) | BraidFurling-mast configuration only. Factory manual calls this 'Main furler.' Source: PDF page 44. | Build recommended replacement |
Jeanneau Sun Odyssey 43 DS with the factory classic-mast arrangement
Factory classic-mast schedule
Spar manufacturerNot stated in source manual
The classic-mast configuration uses three reefing lines and does not use the furling-mast line. Confirm the installed mast and whether the boat carries a symmetric or asymmetric spinnaker before ordering optional lines.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Mainsheet traveler controlWhite / Red | 2 | 6 m Builder preset: 20 ft, rounded up | 5/16 in (8 mm) | BraidFactory manual calls this 'Horse adjustment.' Two lines are specified. Source: PDF pages 42 and 44. | Build recommended replacement |
| Boom vangWhite / Yellow | 1 | 11 m Builder preset: 37 ft, rounded up | 3/8 in (10 mm) | Halyard braidFactory table uses 'Braid H,' defined in the manual as halyard braid. Source: PDF page 42. | Build recommended replacement |
| Mainsail outhaulWhite / Red | 1 | 12 m Builder preset: 40 ft, rounded up | 3/8 in (10 mm) | BraidFactory manual calls this 'Main foot band.' Source: PDF page 42. | Build recommended replacement |
| Main halyardWhite / Yellow | 1 | 36 m Builder preset: 119 ft, rounded up | 1/2 in (12 mm) | Halyard braidFactory table uses 'Braid H,' defined in the manual as halyard braid. The SuperSpeed builder color differs from the factory color. Source: PDF page 44. | Build recommended replacement |
| MainsheetWhite / Red | 1 | 20 m Builder preset: 66 ft, rounded up | 1/2 in (12 mm) | BraidSource: PDF page 44. | Build recommended replacement |
| Main topping liftWhite / Yellow | 1 | 32 m Builder preset: 105 ft, rounded up | 5/16 in (8 mm) | BraidSource: PDF page 44. | Build recommended replacement |
| Genoa halyardWhite / Blue | 1 | 36 m Builder preset: 119 ft, rounded up | 1/2 in (12 mm) | Halyard braidFactory table uses 'Braid H,' defined in the manual as halyard braid. The SuperSpeed builder color differs from the factory color. Source: PDF page 46. | Build recommended replacement |
| Genoa furling lineWhite / Yellow | 1 | 23 m Builder preset: 76 ft, rounded up | 3/8 in (10 mm) | BraidSource: PDF page 46. | Build recommended replacement |
| Genoa sheetsWhite / Blue | 2 | 17 m Builder preset: 56 ft, rounded up | 9/16 in (14 mm) | BraidThe factory specifies two 17 m sheets. A 14 mm builder variant is not currently available. Source: PDF page 46. | Request a quote |
| Spinnaker halyard - symmetric optionWhite / Yellow | 1 | 40 m Builder preset: 132 ft, rounded up | 1/2 in (12 mm) | Halyard braidOptional symmetric-spinnaker equipment. The SuperSpeed builder color differs from the factory color. Source: PDF page 48. | Build recommended replacement |
| Spinnaker pole lift - symmetric optionWhite / Green / Black | 1 | 39 m Builder preset: 128 ft, rounded up | 3/8 in (10 mm) | BraidOptional symmetric-spinnaker equipment. No exact current builder color match. Source: PDF page 48. | Build recommended replacement |
| Spinnaker guys and sheets - symmetric optionWhite / Red | 2 | 24 m Builder preset: 79 ft, rounded up | 1/2 in (12 mm) | KevlarOptional symmetric-spinnaker equipment. Factory construction is Kevlar; verify the modern replacement before ordering. Source: PDF page 48. | Build recommended replacement |
| Spinnaker pole downhaul - symmetric optionWhite / Violet / Green | 1 | 18 m Builder preset: 60 ft, rounded up | 3/8 in (10 mm) | BraidOptional symmetric-spinnaker equipment. No exact current builder color match. Source: PDF page 48. | Build recommended replacement |
| Spinnaker pole-car adjustment - symmetric optionWhite / Yellow | 1 | 10 m Builder preset: 33 ft, rounded up | 5/16 in (8 mm) | BraidOptional symmetric-spinnaker equipment. Source: PDF page 48. | Build recommended replacement |
| Spinnaker halyard - asymmetric optionWhite / Yellow | 1 | 40 m Builder preset: 132 ft, rounded up | 1/2 in (12 mm) | Halyard braidOptional asymmetric-spinnaker equipment. The SuperSpeed builder color differs from the factory color. Source: PDF page 48. | Build recommended replacement |
| Spinnaker sheets - asymmetric optionWhite / Green | 2 | 24 m Builder preset: 79 ft, rounded up | 1/2 in (12 mm) | KevlarOptional asymmetric-spinnaker equipment. Factory construction is Kevlar; verify the modern replacement before ordering. Source: PDF page 48. | Build recommended replacement |
| Tack runner - asymmetric optionWhite / Red | 1 | 6 m Builder preset: 20 ft, rounded up | 3/8 in (10 mm) | Halyard braidOptional asymmetric-spinnaker equipment. Source: PDF page 48. | Build recommended replacement |
| Reef 1White / Green | 1 | 20 m Builder preset: 66 ft, rounded up | 1/2 in (12 mm) | BraidClassic-mast configuration only. Source: PDF page 44. | Build recommended replacement |
| Reef 2White / Red | 1 | 17 m Builder preset: 56 ft, rounded up | 1/2 in (12 mm) | BraidClassic-mast configuration only. Source: PDF page 42. | Build recommended replacement |
| Reef 3White / Blue | 1 | 23 m Builder preset: 76 ft, rounded up | 1/2 in (12 mm) | BraidClassic-mast configuration only. No exact current builder color match. Source: PDF page 44. | Build recommended replacement |