Running rigging by boat
Use the published factory sizes and lengths below as a starting point, then open a line preloaded in our custom running-rigging builder.
Island Packet 38 - confirm the hull year and existing routing before ordering
Factory owner’s-manual schedule
The owner’s manual identifies these as the Island Packet 38 running-rigging specifications. The staysail equipment applies only to cutter-rigged boats. The manual notes that supplied halyards were low-stretch Dacron; it does not identify the spar manufacturer or the construction of the remaining rope lines.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Main halyard | 1 | 121 ft | 7/16 in (11 mm) | Low-stretch Dacron (manual description)Suggested modern low-stretch replacement shown in the builder. | Build recommended replacement |
| Mainsheet | 1 | 74 ft | 1/2 in (12 mm) | Not stated in owner’s-manual schedule | Build recommended replacement |
| Main topping lift tail | 1 | 30 ft | 5/16 in (8 mm) | Not stated in owner’s-manual schedule | Build recommended replacement |
| Main topping lift wire | 1 | 38 ft | 1/8 in (3 mm) | 7x7 wireWire component; request a rigging quote rather than using the rope builder. | Request a quote |
| Staysail halyard | 1 | 85 ft | 3/8 in (10 mm) | Low-stretch Dacron (manual description)Optional cutter-rig equipment. Suggested modern low-stretch replacement shown in the builder. | Build recommended replacement |
| Staysail sheet | 1 | 84 ft | 7/16 in (11 mm) | Not stated in owner’s-manual scheduleOptional cutter-rig equipment. | Build recommended replacement |
| Staysail clew line | 1 | 65 ft | 3/8 in (10 mm) | Not stated in owner’s-manual scheduleOptional cutter-rig equipment. | Build recommended replacement |
| Staysail topping lift | 1 | 79 ft | 5/16 in (8 mm) | Not stated in owner’s-manual scheduleOptional cutter-rig equipment. | Build recommended replacement |
| Jib halyard | 1 | 100 ft | 7/16 in (11 mm) | Low-stretch Dacron (manual description)Suggested modern low-stretch replacement shown in the builder. | Build recommended replacement |
| Jib sheet | 1 | 160 ft | 1/2 in (12 mm) | Not stated in owner’s-manual scheduleThe manual lists one 160 ft jib-sheet line. | Build recommended replacement |
| Traveler control | 1 | 29 ft | 3/8 in (10 mm) | Not stated in owner’s-manual schedule | Build recommended replacement |