Running rigging by boat
Use the published factory sizes and lengths below as a starting point, then open a line preloaded in our custom running-rigging builder.
Hunter Passage 42 equipped with the original Isomat mast package
Factory Isomat mast schedule
Spar manufacturerIsomat
This schedule is specifically headed 'Passage 42 Rigging Specifications for Isomat Masts.' Do not use it for a Passage 42 with a Z-Spar, Seldén, or replacement spar package. The same page also specifies 1x19 stainless-steel standing rigging.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Main halyard | 1 | 121 ft | 7/16 in (11 mm) | XLS Extra Spectra reinforced lineFactory table specifies a headboard shackle. Color is not stated; verify the existing line and attachment before ordering. | Request a quote |
| Genoa halyard | 1 | 123 ft | 7/16 in (11 mm) | XLS Extra Spectra reinforced lineFactory table specifies a snap shackle. Color is not stated; verify the existing line and attachment before ordering. | Request a quote |
| Mainsheet | 1 | 69 ft | 7/16 in (11 mm) | Low-stretch DacronFactory table specifies an eye splice and shackle. The current builder does not offer this construction in 7/16 in. | Request a quote |
| Genoa sheets | 2 | 60 ft | 1/2 in (12 mm) | Low-stretch DacronThe table uses the plural 'sheets'; quantity is interpreted as two 60 ft sheets. Confirm before ordering. | Build recommended replacement |
| Furling line | 1 | 75 ft | 7/16 in (11 mm) | Low-stretch DacronAttachment and color are not stated. The current builder does not offer this construction in 7/16 in. | Request a quote |
| Traveller control lines | 2 | 17 ft | 3/8 in (10 mm) | Low-stretch DacronFactory table specifies an eye splice. The plural description is interpreted as two 17 ft lines; confirm before ordering. | Build recommended replacement |
| Vang line - short part | 1 | 10 ft | 1/2 in (12 mm) | Low-stretch DacronFactory table specifies an eye splice and snap shackle. | Build recommended replacement |
| Vang line - long part | 1 | 36 ft | 3/8 in (10 mm) | Low-stretch DacronFactory table specifies an eye splice. | Build recommended replacement |
| Topping lift | 1 | 60 ft | 3/8 in (10 mm) | Low-stretch DacronAttachment and color are not stated. | Build recommended replacement |
| Anchor line | 1 | 250 ft | 1/2 in (12 mm) | NylonFactory table specifies a shackle. This is anchor rode, not a running-rigging builder item. | Request a quote |
| Anchor chain | 1 | 20 ft | 5/16 in (8 mm) | High-tensile chainFactory table specifies two shackles. Confirm the windlass gypsy chain standard before ordering. | Request a quote |