Running rigging by boat
Use the published factory sizes and lengths below as a starting point, then open a line preloaded in our custom running-rigging builder.
Hunter Legend 40.5 - verify the manual revision and existing rig before ordering
Factory running-rigging schedule
Spar manufacturerNot stated in source manual
The manual states that SECO South supplied the rigging but does not name the spar manufacturer. B.B.E. means burned both ends.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Main halyard | 1 | 134 ft | 7/16 in (11 mm) | SpectraFactory table specifies a headboard shackle. Color is not stated; confirm the existing line before ordering. | Request a quote |
| Genoa halyard | 1 | 120 ft | 7/16 in (11 mm) | SpectraFactory table specifies a swivel snap shackle. Color is not stated; confirm the existing line before ordering. | Request a quote |
| Mainsheet | 1 | 76 ft | 7/16 in (11 mm) | Not statedFactory table specifies an eye splice. The current builder does not offer the intended construction in 7/16 in. | Request a quote |
| Genoa sheets | 2 | 55 ft | 1/2 in (12 mm) | Not statedFactory table specifies two 55 ft pieces, burned both ends. | Build recommended replacement |
| Furling line | 1 | 70 ft | 7/16 in (11 mm) | Not statedFactory table specifies burned both ends. The current builder does not offer the intended construction in 7/16 in. | Request a quote |
| Traveller control lines | 2 | 29 ft | 3/8 in (10 mm) | Not statedFactory table specifies two 29 ft pieces with an eye splice. | Build recommended replacement |
| Vang line - short part | 1 | 2.9 m Builder preset: 10 ft, rounded up | 1/2 in (12 mm) | Not statedPublished length is 9 ft 6 in. Builder preset is rounded up to 10 ft. Factory table specifies an eye splice with shackle on one end. | Build recommended replacement |
| Vang line - long part | 1 | 46 ft | 3/8 in (10 mm) | Not statedFactory table specifies an eye splice. | Build recommended replacement |
| Topping lift | 1 | 70 ft | 3/8 in (10 mm) | Not statedFactory table specifies a shackle. | Build recommended replacement |
| Anchor line | 1 | 250 ft | 5/8 in (16 mm) | Not statedFactory table specifies a shackle. This is anchor rode, not a running-rigging builder item. | Request a quote |
| Reef #1 | 1 | 82 ft | 7/16 in (11 mm) | Not statedFactory table specifies burned both ends. The current builder does not offer the intended construction in 7/16 in. | Request a quote |
| Reef #2 | 1 | 114 ft | 7/16 in (11 mm) | Not statedFactory table specifies burned both ends. The current builder does not offer the intended construction in 7/16 in. | Request a quote |