Running rigging by boat
Use the published factory sizes and lengths below as a starting point, then open a line preloaded in our custom running-rigging builder.
Hunter 36 with the standard-mast arrangement; verify the hull year, mast and existing lines before ordering
Standard mast - factory schedule
Spar manufacturerNot stated in source manual
The Hunter 36 operator's manual identifies the adjacent rig description as the H36 B&R rig, and the supplied factory table is headed 'Standard Mast.' The table does not identify the spar manufacturer. The traveler builder length is set to 30 ft by owner instruction because the printed 9.1 m and 26 ft values conflict.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Main halyardBlue | 1 | 38.4 m Builder preset: 126 ft, rounded up | 7/16 in (11 mm) | Samson XLS ExtraFactory schedule specifies a headboard shackle and a bare opposite end. The builder uses a standard halyard shackle. | Build recommended replacement |
| MainsheetBlue fleck | 1 | 24.4 m Builder preset: 81 ft, rounded up | 3/8 in (9.5 mm) | Samson XLSFactory schedule specifies a small eye and a bare opposite end. | Build recommended replacement |
| Boom topping liftWhite | 1 | 33.5 m Builder preset: 110 ft, rounded up | 5/16 in (8 mm) | Samson LSFactory schedule specifies a small eye and a bare opposite end. | Build recommended replacement |
| Reefing line #1Green fleck | 1 | 24.4 m Builder preset: 81 ft, rounded up | 3/8 in (9.5 mm) | Samson LSFactory schedule specifies bare ends. | Build recommended replacement |
| Reefing line #2Red fleck | 1 | 33.5 m Builder preset: 110 ft, rounded up | 3/8 in (9.5 mm) | Samson LSFactory schedule specifies bare ends. | Build recommended replacement |
| VangWhite | 1 | 10.7 m Builder preset: 36 ft, rounded up | 3/8 in (9.5 mm) | Samson LSFactory schedule specifies a small eye and a bare opposite end. | Build recommended replacement |
| Lazy-jack wiresWhite | 2 | 5.2 m Builder preset: 18 ft, rounded up | 1/8 in (3.2 mm) | Plastic-coated 7x7 wireFactory schedule specifies an eye and thimble with a small shackle at one end and an eye with a large thimble at the other; request a rigging quote. | Request a quote |
| Lazy-jack linesWhite | 2 | 4.9 m Builder preset: 17 ft, rounded up | 5/16 in (8 mm) | Samson LSFactory schedule lists two 16 ft lines with bare ends. | Build recommended replacement |
| Adjustable lazy-jack linesWhite | 2 | 8.5 m Builder preset: 28 ft, rounded up | 5/16 in (8 mm) | Samson LSFactory schedule lists two 28 ft lines with a bare end and a spliced stainless-steel thimble. | Build recommended replacement |
| Jib halyardRed | 1 | 34.1 m Builder preset: 112 ft, rounded up | 3/8 in (9.5 mm) | Samson XLSFactory schedule specifies a small eye and a bare opposite end. | Build recommended replacement |
| Jib sheetsRed fleck | 2 | 13.7 m Builder preset: 45 ft, rounded up | 7/16 in (11 mm) | Samson LSFactory schedule lists two 45 ft lines with bare ends. | Build recommended replacement |
| Spinnaker halyardBlack | 1 | 35 m Builder preset: 115 ft, rounded up | 3/8 in (9.5 mm) | Samson XLSFactory schedule specifies snap shackle NF11000S and a bare opposite end. The recommended low-stretch replacement is gray because black is not available in this builder size. | Build recommended replacement |
| Main traveler linesWhite | 2 | 9.1 m Builder preset: 30 ft, rounded up | 5/16 in (8 mm) | Samson LSOptional. The table prints 9.1 m and 26 ft, which conflict; the database and builder use the owner-directed 30 ft length. Factory schedule specifies a small eye and a bare opposite end. | Build recommended replacement |
| Spinnaker sheetsBlack fleck | 2 | 24.4 m Builder preset: 81 ft, rounded up | 3/8 in (9.5 mm) | Samson LSOptional. Factory schedule lists two 80 ft lines with bare ends; the recommended replacement is solid black. | Build recommended replacement |