Running rigging by boat
Use the published factory sizes and lengths below as a starting point, then open a line preloaded in our custom running-rigging builder.
Beneteau Oceanis 423 with the classic mast arrangement
Factory schedule - classic mast
Spar manufacturerNot stated in source manual
The supplied factory excerpt identifies classic- and roller-furling-mast lines separately but does not name the spar manufacturer. The excerpt ends after Reef 2, so this is intentionally marked as a partial schedule.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Gennaker halyard - XLS Extra optionRedFactory code 113172 | 1 | 40 m Builder preset: 132 ft, rounded up | 7/16 in (11 mm) | Samson XLS ExtraFactory table specifies a soft eye with snap shackle W2477 at one end and whipping with a loop at the other. The builder opens a suitable 11 mm red low-stretch replacement with a standard snap shackle; verify the installed shackle and finished-end details before ordering. | Build recommended replacement |
| Gennaker halyard - LSTC optionRedFactory code 113143 | 1 | 40 m Builder preset: 132 ft, rounded up | 7/16 in (11 mm) | Samson LSTCFactory table specifies a soft eye with Wichard 2475 snap shackle and a burned opposite end. Verify which factory option is installed. | Request a quote |
| Gennaker tack strop - twin-sheet systemBlackFactory code 113143 | 1 | 7 m Builder preset: 23 ft, rounded up | 1/2 in (12 mm) | Samson LSTCFactory table specifies burned ends. | Request a quote |
| Gennaker sheets - twin-sheet systemRedFactory code 113143 | 2 | 30 m Builder preset: 99 ft, rounded up | 7/16 in (11 mm) | Samson LSTCFactory table specifies burned ends. | Request a quote |
| Gennaker tack strop - single-sheet systemRedFactory code 113178 | 1 | 6.097 m Builder preset: 21 ft, rounded up | 1/2 in (12 mm) | Samson LSOptional. Factory table specifies a soft eye with W2475 snap shackle and a whipped opposite end. | Request a quote |
| Gennaker sheet - single-sheet systemRedFactory code 113177 | 1 | 30 m Builder preset: 99 ft, rounded up | 7/16 in (11 mm) | Samson XLS ExtraFactory table specifies a soft eye with W2475 snap shackle and a whipped opposite end. | Request a quote |
| Whisker-pole topping liftBlack | 1 | 40 m Builder preset: 132 ft, rounded up | 3/8 in (10 mm) | Samson XLS ExtraOptional. Factory table specifies a soft eye with W2475 snap shackle and whipping with a loop. | Build recommended replacement |
| Whisker-pole downhaulRed | 1 | 25 m Builder preset: 83 ft, rounded up | 3/8 in (10 mm) | Samson XLS ExtraOptional. Factory table specifies a soft eye with W2475 snap shackle and whipping with a loop. | Build recommended replacement |
| Jib halyard #1Blue | 1 | 36 m Builder preset: 119 ft, rounded up | 1/2 in (12 mm) | Gleistein TasmaniaStandard and pre-installed on the mast. Factory table specifies a knotted eye with an 8 mm D shackle (Z3639) and a burned opposite end. | Request a quote |
| Jib halyard #2Green | 1 | 36.5 m Builder preset: 120 ft, rounded up | 7/16 in (11 mm) | Samson XLS ExtraOptional. Factory table specifies a soft eye with W2475 snap shackle and whipping with a loop. | Request a quote |
| Jib sheetsBlackFactory code 113179 | 2 | 14.5 m Builder preset: 48 ft, rounded up | 1/2 in (12 mm) | Samson LSStandard. Factory table specifies whipping at both ends. | Request a quote |
| Genoa roller-furling lineYellow | 1 | 30 m Builder preset: 99 ft, rounded up | 3/8 in (10 mm) | New England Double BraidSupplied with the Profurl furler; factory table specifies burned ends. | Request a quote |
| MainsheetGreyFactory code 113180 | 1 | 23 m Builder preset: 76 ft, rounded up | 1/2 in (12 mm) | Samson LSStandard. Factory table specifies a soft eye and whipping with a loop. | Request a quote |
| Vang lineRed | 1 | 13 m Builder preset: 43 ft, rounded up | 3/8 in (10 mm) | Gleistein TasmaniaStandard and supplied with the vang; factory table specifies burned ends. | Build recommended replacement |
| Mainsheet traveller control lineWhiteFactory code 113154 | 2 | 9.5 m Builder preset: 32 ft, rounded up | 5/16 in (8 mm) | Samson LSStandard. Factory table specifies a soft eye and a whipped opposite end. | Build recommended replacement |
| Main halyardBlack | 1 | 36 m Builder preset: 119 ft, rounded up | 1/2 in (12 mm) | Gleistein TasmaniaClassic mast. Standard and pre-installed on the mast. Factory table specifies a knotted eye with an 8 mm D shackle (Z3637) and a burned opposite end. | Build recommended replacement |
| Main-boom topping liftYellow | 1 | 31 m Builder preset: 102 ft, rounded up | 5/16 in (8 mm) | Gleistein TasmaniaClassic mast. Standard and pre-installed on the mast. Factory table specifies a knotted eye with a 7 mm D shackle (Z3639) and a burned opposite end. | Request a quote |
| Outhaul line #1Red | 1 | 3 m Builder preset: 10 ft, rounded up | 5/16 in (8 mm) | Gleistein TasmaniaClassic mast. Standard and supplied with the boom; factory table specifies a burned end and a knotted eye on single block with becket Z253. | Build recommended replacement |
| Outhaul line #2Red | 1 | 4 m Builder preset: 14 ft, rounded up | 5/16 in (8 mm) | Gleistein TasmaniaClassic mast. Standard and supplied with the boom; factory table specifies a knotted eye and a burned opposite end. | Build recommended replacement |
| Reef 1Green | 1 | 22 m Builder preset: 73 ft, rounded up | 3/8 in (10 mm) | Gleistein TasmaniaClassic mast. Supplied with the boom; factory table specifies burned ends. | Build recommended replacement |
| Reef 2Yellow | 1 | 31 m Builder preset: 102 ft, rounded up | 3/8 in (10 mm) | Gleistein TasmaniaClassic mast. Supplied with the boom; factory table specifies burned ends. | Request a quote |
Beneteau Oceanis 423 with the roller-furling mast arrangement
Factory schedule - roller-furling mast
Spar manufacturerNot stated in source manual
Do not use the classic-mast reef and outhaul lengths for this configuration. Confirm the installed mast and routing before ordering.
| Line | Qty. | Published length | Diameter | Original material | Order |
|---|---|---|---|---|---|
| Gennaker halyard - XLS Extra optionRedFactory code 113172 | 1 | 40 m Builder preset: 132 ft, rounded up | 7/16 in (11 mm) | Samson XLS ExtraFactory table specifies a soft eye with snap shackle W2477 at one end and whipping with a loop at the other. The builder opens a suitable 11 mm red low-stretch replacement with a standard snap shackle; verify the installed shackle and finished-end details before ordering. | Build recommended replacement |
| Gennaker halyard - LSTC optionRedFactory code 113143 | 1 | 40 m Builder preset: 132 ft, rounded up | 7/16 in (11 mm) | Samson LSTCFactory table specifies a soft eye with Wichard 2475 snap shackle and a burned opposite end. Verify which factory option is installed. | Request a quote |
| Gennaker tack strop - twin-sheet systemBlackFactory code 113143 | 1 | 7 m Builder preset: 23 ft, rounded up | 1/2 in (12 mm) | Samson LSTCFactory table specifies burned ends. | Request a quote |
| Gennaker sheets - twin-sheet systemRedFactory code 113143 | 2 | 30 m Builder preset: 99 ft, rounded up | 7/16 in (11 mm) | Samson LSTCFactory table specifies burned ends. | Request a quote |
| Gennaker tack strop - single-sheet systemRedFactory code 113178 | 1 | 6.097 m Builder preset: 21 ft, rounded up | 1/2 in (12 mm) | Samson LSOptional. Factory table specifies a soft eye with W2475 snap shackle and a whipped opposite end. | Request a quote |
| Gennaker sheet - single-sheet systemRedFactory code 113177 | 1 | 30 m Builder preset: 99 ft, rounded up | 7/16 in (11 mm) | Samson XLS ExtraFactory table specifies a soft eye with W2475 snap shackle and a whipped opposite end. | Request a quote |
| Whisker-pole topping liftBlack | 1 | 40 m Builder preset: 132 ft, rounded up | 3/8 in (10 mm) | Samson XLS ExtraOptional. Factory table specifies a soft eye with W2475 snap shackle and whipping with a loop. | Build recommended replacement |
| Whisker-pole downhaulRed | 1 | 25 m Builder preset: 83 ft, rounded up | 3/8 in (10 mm) | Samson XLS ExtraOptional. Factory table specifies a soft eye with W2475 snap shackle and whipping with a loop. | Build recommended replacement |
| Jib halyard #1Blue | 1 | 36 m Builder preset: 119 ft, rounded up | 1/2 in (12 mm) | Gleistein TasmaniaStandard and pre-installed on the mast. Factory table specifies a knotted eye with an 8 mm D shackle (Z3639) and a burned opposite end. | Request a quote |
| Jib halyard #2Green | 1 | 36.5 m Builder preset: 120 ft, rounded up | 7/16 in (11 mm) | Samson XLS ExtraOptional. Factory table specifies a soft eye with W2475 snap shackle and whipping with a loop. | Request a quote |
| Jib sheetsBlackFactory code 113179 | 2 | 14.5 m Builder preset: 48 ft, rounded up | 1/2 in (12 mm) | Samson LSStandard. Factory table specifies whipping at both ends. | Request a quote |
| Genoa roller-furling lineYellow | 1 | 30 m Builder preset: 99 ft, rounded up | 3/8 in (10 mm) | New England Double BraidSupplied with the Profurl furler; factory table specifies burned ends. | Request a quote |
| MainsheetGreyFactory code 113180 | 1 | 23 m Builder preset: 76 ft, rounded up | 1/2 in (12 mm) | Samson LSStandard. Factory table specifies a soft eye and whipping with a loop. | Request a quote |
| Vang lineRed | 1 | 13 m Builder preset: 43 ft, rounded up | 3/8 in (10 mm) | Gleistein TasmaniaStandard and supplied with the vang; factory table specifies burned ends. | Build recommended replacement |
| Mainsheet traveller control lineWhiteFactory code 113154 | 2 | 9.5 m Builder preset: 32 ft, rounded up | 5/16 in (8 mm) | Samson LSStandard. Factory table specifies a soft eye and a whipped opposite end. | Build recommended replacement |
| Main halyardBlack | 1 | 36 m Builder preset: 119 ft, rounded up | 1/2 in (12 mm) | Gleistein TasmaniaRoller-furling mast. Standard and pre-installed on the mast. Factory table specifies a knotted eye with a 6 mm D shackle (Z5639) and a burned opposite end. | Build recommended replacement |
| Main-boom topping liftYellow | 1 | 31 m Builder preset: 102 ft, rounded up | 5/16 in (8 mm) | Gleistein TasmaniaRoller-furling mast. Standard and pre-installed on the mast. Factory table specifies a knotted eye with a 7 mm D shackle (Z3639) and a burned opposite end. | Request a quote |
| Mainsail roller-furling inhaul lineYellow | 1 | 18 m Builder preset: 60 ft, rounded up | 3/8 in (10 mm) | Gleistein TasmaniaStandard and supplied with the roller-furling mast; factory table specifies burned ends. | Request a quote |
| Mainsail roller-furling outhaul lineBlack | 1 | 18 m Builder preset: 60 ft, rounded up | 1/2 in (12 mm) | Gleistein TasmaniaStandard and supplied with the boom; factory table specifies burned ends. | Request a quote |